НПП Азимут - гироскопические и магнитные инклинометрические системы
 русская версия
НовостиО компанииПродукцияКлиентыКонтакты



 

 

 

 

 

GIMBALLESS 

MAGNETOMETRIC 

MULTIPLEPOINT 

CONTINUOUS 

INCLINOMETER 

 

IMMC-44-120/80 

 

 

 

 

 

 

        Gimballess magnetometric inclinometer (GI) IMMC-42-120/80 is designed to measure inclination angle, directional readings, whipstock positioning angle and the vertical depth of deviated and horizontal open wells, may be installed into hardwire telemetric bottom-hole systems as well.

         The advantages of the given IMMC-42-120/80 over similar CIS magnetometric inclinometers are the following:

  IMMC-42-120/80 provides continuous and point inclinometry and their prompt alignment;

   in IMMC-42-120/80 “control-test” is foreseen, allowing to minimize tests and calibration works before well descent and automatically control tool operation efficiency during the process of work; 

 - the IMMC-42-120/80 is designed as a modular construction, allowing to reduce the volume of maintenance and repair works.   

        The system software allows you to promptly receive intermediary results of the inspection of the vertical depth and the well angle in graphic and numeric form, inspect its every section in detail. 

 The full set:  

 1.        Well-logging tool                                          - 1 (2)  

2.        Extension                                                      - 1 t    

3.        Ground operator’s stand                                - 1  

4.         Computer (on the request of the customer)    -1 

5.         Software                                                       - 1 disk 

6.         Certificate of quality                                       - 1 copy        

7.         Operation manual                                           - 1  

8.         Package                                                        -1 set 

9.         Spare tools and devices                                 - 1 set 

 

 Technical properties:

Directional readings measurement range,                   degrees                               0…360

Inclination angle measurement range,                         degrees                               0...180

Directional readings deviation,                                     degrees.                              1,5

Inclination angle deviation,                                           degrees                               0,15

Angle measurement time in point mode,                      min.                                     0,25

Outside diameter of well-logging tool                          mm                                       76

Length of the well-logging tool                                     mm                                      1600

Length of extension                                                         mm                                      2000

The well-logging tool may operate for 1,5 hours with ambient temperature at  °С  120

Ground stand operation temperature range                  °С                                      -10…+55

Maximum operating pressure of the well-logging       МPа                                   80

tool

Consumption capacity does not exceed                       W                                        10

Weight of the well-logging tool with extension           kg                                       25

Connection of the well-logging tool with the ground

operator’s stand with the help of a three-core cable

Type of interface with computer                                                                                 RS-232C

Time per fault                                                                     hour                                    5000

Guarantee service time                                                      years                                  3

Service time                                                                        years                                  10

 

 


 

© 2007 R&D enterprise “Azimuth”. All rights reserved